Tire Changing Sttuff

[ZATO]

An old subject; any ideas for a not too expensive, works good in minimal floor space, tire changing machine? Thanks.

[BillGsa]

[allikanbe]

You could always try this method: https://www.youtube.com/watch?v=V0nrZadIQxA

[justjoe]

Here's a thought. You could get the No Mar with a trailer hitch mount. Then you can take a few screws out, take off the arms, and store the pieces relatively flat.

[cabnfvr]

Here's a thought. You could get the No Mar with a trailer hitch mount. ....

... which would beat the heck out of driving 60 miles each way to San Antonio on a Sunday afternoon for an almost right size tire and two tire irons. Got 'er done though.

[Lee]

Here's a thought. You could get the No Mar with a trailer hitch mount. Then you can take a few screws out, take off the arms, and store the pieces relatively flat.

I saw pictures where one guy bolted his NoMar to a long 2x10 and when he wanted to use it parked his truck tire on the 2x10 to hold it in place.

[aviator]

I have my NoMar bolted to the concrete floor in our basement. I usually remove the bolts and store it in a corner until needed.

[MattB]

Here's a thought. You could get the No Mar with a trailer hitch mount. Then you can take a few screws out, take off the arms, and store the pieces relatively flat.

I don't know if this setup matches your criteria for "cheap", but it sure is nice, and flexible. I have this exact setup, with the hitch mount. It was not uncommon for me to take mine to the racetrack (now I have a second set of wheels, so that happens less). As Joe mentioned, very easy and quick to tear it down for storage. I highly recommend it.

As an aside, technique is everything when it comes to changing tires. If you spring for the Nomar and struggle at first, do not quit, a few small changes in technique make all the difference. I can typically demount and mount a new tire in less than 3 minutes. I also highly recommend their tire goop, a pint will last you years. I bought a gallon of it recently and shared the love with several friends.

[aviator]

If you are gonna use the no mar for GSA spoke wheels, you need a different set of chocks for that rim. Be specific when you buy.

[EricM]

I found a shop near the cottage 23$ to mount & balance your tire, if you come with wheels off the bike. I know cheaper places but they are >2hrs in VT and ~10hrs in WV

[ZATO]

Been reading and taking in your comments. Some good ideas from everyone. Will start shopping this weekend. Thanks again.

May be easier to cruise up to Vermont and save a couple of bucks.

[BillGsa]

https://youtu.be/YDEcYS1A7KI

[Lee]

I saw a post were a guy bought a Rabaconda Tire changer and said it worked good.
Around $700
https://youtu.be/MZx5K6IdwxI

It can be stored in a small bag
https://rabaconda.com/products/street-bike-tire-changer

[aviator]

Rabaconda is IMHO for peeps 35 yrs old. For anyone over 55, I would recommend pay the dealer to install or at the very least have a nomar.

[allikanbe]

Zip ties work for me. Cheap and relatively easy