Announcement

Collapse
No announcement yet.

Swap R9T or Classic R12R Clusters on 2009 K25 R12R

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

    Swap R9T or Classic R12R Clusters on 2009 K25 R12R

    The cluster on the R12R is toast. I guess I could try to fix it but wanted to see if I could use the ones from the 2011+ R12R (with the double gauges). It looks like the R9T upto 2016.
    Could anyone confirm it it's a direct swap?
    Thanks!

    #2
    I've never met anyone with as many problems with their bikes as you Mondrage. I admire your tenacity.

    Check this out
    https://www.realoem.com/bmw/enUS/par...&q=62118554829

    Comment


      #3
      Originally posted by Captain Howdy View Post
      I've never met anyone with as many problems with their bikes as you Mondrage. I admire your tenacity.

      Check this out
      https://www.realoem.com/bmw/enUS/par...&q=62118554829
      hahahahaha!
      Thank you!
      It's just a lot of them (5) and they're all getting older.
      Maybe I'm too finicky.
      This holiday, I made an expansion the garage so I can properly do the clutch replacement on my K12LT, and normal shaft maintenance in all of them.

      Normal stuff getting worn, and the F800/R1200R clusters have a know problem.

      Most folks move on from the bikes... but I can't let go... so they get old, and they get problems.

      Comment


        #4
        the R9T cluster finally arrived.
        It works and everything,
        but the ABS stops working as there are two different "factory i-Levels".
        The ABS gives a "coding" error.
        Same as the problem I now have with my K12R.

        I will try reaching out to Patrique again, maybe this time we get lucky and make it work.

        Comment

        Working...
        X