An old subject; any ideas for a not too expensive, works good in minimal floor space, tire changing machine? Thanks.
-
Cut with a curse sharp as a knife. Doomed is your soul, damned is your life! -
-
You could always try this method: https://www.youtube.com/watch?v=V0nrZadIQxAComment
-
Here's a thought. You could get the No Mar with a trailer hitch mount. Then you can take a few screws out, take off the arms, and store the pieces relatively flat.
Last edited by justjoe; 07-19-2021, 07:29 AM.
Comment
-
... which would beat the heck out of driving 60 miles each way to San Antonio on a Sunday afternoon for an almost right size tire and two tire irons. Got 'er done though.Originally posted by justjoe View Post
Comment
-
I saw pictures where one guy bolted his NoMar to a long 2x10 and when he wanted to use it parked his truck tire on the 2x10 to hold it in place.Originally posted by justjoe View PostHere's a thought. You could get the No Mar with a trailer hitch mount. Then you can take a few screws out, take off the arms, and store the pieces relatively flat.
Lee
Iowa
2022 R1250RS White SportComment
-
More parts to take apart and store. With this, you just have to remove the arm holding the bead breaker and center pin. I think it is two allen key screws but might be four. -
Years ago I filled an old motorcycle tire with concrete and bolted the NoMar to it. I
could role it off to the side when not using it.
If I was taller it would've worked better. I never have mastered the trick to get the
tire back on the rim using the tool. -
That tool is a joke. I even watched a nomar tire station at a rally when one of the fellow trying to install a nasty GS rear tire, no bueno.
-
-
I have my NoMar bolted to the concrete floor in our basement. I usually remove the bolts and store it in a corner until needed.Chattanooga, TN
Certified Hooligan.
2018 S1000XR, 2014 R1200GSAw, 2015 Husqvarna FE501SComment
-
I have threaded sleeves but I leave mine in place. When I do have to move it, I put smaller bolts in place to keep the crap out of the holes. -
The studs in the floor remain, but I thread the nuts on em so I dint step on it. No big deal. -
Mine stays bolted to the floor between the two overhead doors.
I put a piece of plywood over the tire holders for a table and hang
stuff from the upper bar.... The other tools are stored.
-
-
I don't know if this setup matches your criteria for "cheap", but it sure is nice, and flexible. I have this exact setup, with the hitch mount. It was not uncommon for me to take mine to the racetrack (now I have a second set of wheels, so that happens less). As Joe mentioned, very easy and quick to tear it down for storage. I highly recommend it.Originally posted by justjoe View PostHere's a thought. You could get the No Mar with a trailer hitch mount. Then you can take a few screws out, take off the arms, and store the pieces relatively flat.
As an aside, technique is everything when it comes to changing tires. If you spring for the Nomar and struggle at first, do not quit, a few small changes in technique make all the difference. I can typically demount and mount a new tire in less than 3 minutes. I also highly recommend their tire goop, a pint will last you years. I bought a gallon of it recently and shared the love with several friends.Matt
Street: 2011 Ducati Multistrada S :: 2000 Honda VFR @ 39k :: 2002 BMW K1200RS @ 13k ... round 3
Track: 2008 Suzuki GSX-R 750 :: 2008 Honda CBR1000RR
Dirt: Honda CRF450X
IBA #25520 - Iron Butting the Blue Ridge Parkway
If loud pipes save lives, imagine what learning to ride that thing could do.Comment
-
If you are gonna use the no mar for GSA spoke wheels, you need a different set of chocks for that rim. Be specific when you buy.Chattanooga, TN
Certified Hooligan.
2018 S1000XR, 2014 R1200GSAw, 2015 Husqvarna FE501SComment
-
I found a shop near the cottage 23$ to mount & balance your tire, if you come with wheels off the bike. I know cheaper places but they are >2hrs in VT and ~10hrs in WV
Comment
-
23$ Canadian is like 15$ here..... That's a four pack of decent beer.
So about the same price.
And.... you can't get here from there in two hours either ! -
I mount and balance two tires, check the front bearings, grease the front wheel seals for 35$. north of Seattle. If on the bike it is 50$, cheaper that a good lunch for two. (maybe I need to bump prices)
-
-
Been reading and taking in your comments. Some good ideas from everyone. Will start shopping this weekend. Thanks again.
May be easier to cruise up to Vermont and save a couple of bucks.Cut with a curse sharp as a knife. Doomed is your soul, damned is your life!Comment
-
Comment
-
I saw a post were a guy bought a Rabaconda Tire changer and said it worked good.
Around $700
https://youtu.be/MZx5K6IdwxI
It can be stored in a small bag
https://rabaconda.com/products/street-bike-tire-changerLast edited by Lee; 03-14-2023, 09:47 AM.Lee
Iowa
2022 R1250RS White SportComment
-
Rabaconda is IMHO for peeps 35 yrs old. For anyone over 55, I would recommend pay the dealer to install or at the very least have a nomar.Chattanooga, TN
Certified Hooligan.
2018 S1000XR, 2014 R1200GSAw, 2015 Husqvarna FE501SComment
-
Zip ties work for me. Cheap and relatively easyComment
Comment